Pontiac 2009 Solstice, Owner'S Manual, Page: 104 / 354

Setting Cruise Control
{
CAUTION:
If you leave your cruise control on when you are
not using cruise, you might hit a button and go
into cruise when you do not want to. You could be
startled and even lose control. Keep the cruise
control switch off until you want to use cruise
control.
The cruise control buttons
are located on the left side
of the steering wheel.
J
(On/Off): Press to turn the cruise control system on
and off.
RES+ (Resume): Press to resume a set speed and to
accelerate the speed.
SET
−
(Set): Press to set a speed and to decrease the
speed.
To set a speed do the following:
1. Press
I
to turn cruise control on. The indicator
light on the button will come on.
2. Get to the desired speed.
3. Press the SET
−
control button and release it. The
CRUISE ENGAGED message will appear on the
Driver Information Center (DIC) to show the system
is engaged.
4. Take your foot off the accelerator pedal.
When you apply the brakes or depress the clutch, the
cruise control will shut off.
Resuming a Set Speed
If the cruise control is at a desired speed and then the
brake is applied, this disengages the cruise control.
But it does not need to be reset. Once the vehicle
is going about 25 mph (40 km/h) or more, press the
RES+ button briefly.
This takes you back up to the previously chosen speed
and stays there.
3-10