Pontiac 2006 Montana SV6 Owner'S Manual Download Page 15

Page: 15 / 454

The other lever is located
on the rear of the seat.

To adjust the second row bucket seats forward or
rearward, do the following:

1. Lift up either lever and slide the seat forward or

rearward.

2. Release the lever when the seat is in the desired

position.

3. Push and pull on the seat to make sure it is locked.

Folding or Reclining the Seatbacks

The seatback on a bucket seat can either be
folded forward or reclined using the nylon strap or
the recline lever.

To fold the seatback forward, do the following:

1. Pull the nylon strap, located on the rear right hand

side of the seat, or lift the recline lever, located on
the front right hand side of the seatback to
release the seatback.

2. Fold the seatback forward.

Nylon Strap

Recline Lever

1-9

Summary of Contents for 2006 Montana SV6







































































































































































































































































































































































































































































Search results

Summary of Contents for 2006 Montana SV6

Reviews:

Pontiac 2006 Montana SV6, Owner'S Manual, Page: 15 / 454

Search results

Summary of Contents for 2006 Montana SV6

Reviews: