Pontiac 2006 Montana SV6 Owner'S Manual Download Page 145

Page: 145 / 454

Turn Signal/Multifunction Lever

The lever on the left side of the steering column
includes the following:

•

Turn and Lane Change Signals. See Turn and

Lane-Change Signals on page 3-7.

•

Headlamp High/Low-Beam Changer. See

Headlamp High/Low-Beam Changer on page 3-8.

•

Flash-to-Pass. See Flash-to-Pass on page 3-8.

•

Windshield Wipers. See Windshield Wipers on

page 3-9.

•

Windshield Washer. See Windshield Washer

on page 3-9.

•

Rear Window Wiper. See Windshield Washer

on page 3-9.

•

Rear Window Washer. See Windshield Washer

on page 3-9.

For information on the headlamps, see Exterior Lamps
on page 3-14.

Turn and Lane-Change Signals

The turn signal has two upward (for right) and
two downward (for left) positions. These positions
allow you to signal a turn or a lane change.

To signal a turn, move the lever all the way up or
down. When the turn is finished, the lever will return
automatically.

3-7

Summary of Contents for 2006 Montana SV6







































































































































































































































































































































































































































































Search results

Summary of Contents for 2006 Montana SV6

Reviews:

Pontiac 2006 Montana SV6, Owner'S Manual, Page: 145 / 454

Search results

Summary of Contents for 2006 Montana SV6

Reviews: