Pontiac 2006 Montana SV6 Owner'S Manual Download Page 14 | Manualshive

Page: 14 / 454

Pontiac 2006 Montana SV6 Owner'S Manual Download Page 14

3. Pull the nylon strap, located on the rear right hand

side of the seat, or lift the recline lever, located on
the front right hand side of the seatback, to raise
the seatback to the upright position.

{

CAUTION:

If the seatback is not locked, it could move
forward in a sudden stop or crash. That could
cause injury to the person sitting there. Always
push and pull on the seatback to be sure it is
locked.

4. Push and pull on the seatback to check that it

is locked.

Adjusting the Bucket Seats Forward
and Rearward

There are two adjustment levers on the second row
bucket seats that enable them to move forward or
rearward.

One is located below the front of the seat.

1-8

«
...
12
13
14
15
16
...
»

Summary of Contents for 2006 Montana SV6







































































































































































































































































































































































































































































Reviews:

No comments