Pontiac 2005 Vibe Owner'S Manual Download Page 273

Page: 273 / 374

3. Release the retainer clip holding the bulb on the

headlamp by pressing down and moving the
metal retainer away from you.

Turn the turn signal/parking lamp bulb socket
counterclockwise to remove.

4. Pull the bulb out of the fixture.

5. Reverse the steps to install a new bulb.

Center High-Mounted Stoplamp
(CHMSL)

To replace the center high-mounted stoplamp bulb,
do the following:

1. Locate the bulb which is on the inside of the

liftgate/liftglass near the top.

2. Remove the two clips on both sides of the cover

and remove it.

3. Remove the two screws from the CHMSL housing.

Then remove the housing to expose the bulb.

5-51

Summary of Contents for 2005 Vibe























































































































































































































































































































































































Search results

Summary of Contents for 2005 Vibe

Reviews:

Pontiac 2005 Vibe, Owner'S Manual, Page: 273 / 374

Search results

Summary of Contents for 2005 Vibe

Reviews: