manualshive.com logo in svg

Pontiac 2001 Aztek, Owner'S Manual, Page: 76 / 433

Share
Download
Pontiac 2001 Aztek Owner'S Manual Download Page 76

1-64

4. To tighten the belt, pull up on the shoulder belt while

you push down on the child restraint. If you’re using
a forward

-

facing child restraint, you may find it

helpful to use your knee to push down on the child
restraint as you tighten the belt.

5. Push and pull the child restraint in different

directions to be sure it is secure.

To remove the child restraint, just unbuckle the vehicle’s
safety belt and let it go back all the way. The safety belt
will move freely again and be ready to work for an adult
or larger child passenger.

Securing a Child Restraint in the Center
Rear Seat Position (Bench Seat)

The center rear seating position has a lap

-

shoulder belt.

To secure a child restraint in this position, you’ll use
only the lap part of the belt. Disconnect the shoulder
part of the belt and store it before securing a child
restraint. Be sure to follow the instructions that came
with the child restraint. Secure the child in the child
restraint when and as the instructions say.

See the earlier part about the top strap if the child
restraint has one.

Summary of Contents for 2001 Aztek


















































































































































































































































































































































































































































Reviews:

No comments