manualshive.com logo in svg

Pontiac 2001 Aztek, Owner'S Manual, Page: 429 / 433

Share
Download
Pontiac 2001 Aztek Owner'S Manual Download Page 429

8-11

Courtesy Rental Vehicle

When your vehicle is unavailable due to overnight
warranty repairs, your dealer may arrange to provide you
with a courtesy rental vehicle or reimburse you for a rental
vehicle you obtained, at actual cost, up to a maximum 
of $30.00 per day supported by receipts. This requires 
that you sign and complete a rental agreement and meet
state, local and rental vehicle provider requirements.
Requirements vary and may include minimum age
requirements, insurance coverage, credit card, etc. 
You are responsible for fuel usage charges and may also
be responsible for taxes, levies, usage fees, excessive
mileage or rental usage beyond the completion of 
the repair.

Generally it is not possible to provide a like

-

vehicle 

as a courtesy rental.

Additional Program Information

Courtesy Transportation is available during the
Bumper

-

to

-

Bumper warranty coverage period, but it is not

part of the New Vehicle Limited Warranty. A separate
booklet entitled “Warranty and Owner Assistance
Information” furnished with each new vehicle provides
detailed warranty coverage information.

Courtesy Transportation is available only at
participating dealers and all program options, such as
shuttle service, may not be available at every dealer.
Please contact your dealer for specific information about
availability. All Courtesy Transportation arrangements
will be administered by appropriate dealer personnel.

Canadian Vehicles: For warranty repairs during the
Complete Vehicle Coverage period of the General
Motors of Canada New Vehicle Limited Warranty,
alternative transportation may be available under the
Courtesy Transportation Program. Please consult your
dealer for details.

General Motors reserves the right to unilaterally modify,
change or discontinue Courtesy Transportation at any
time and to resolve all questions of claim eligibility
pursuant to the terms and conditions described herein 
at its sole discretion.

Warranty Information

Your vehicle comes with a separate warranty booklet
that contains detailed warranty information.

Summary of Contents for 2001 Aztek


















































































































































































































































































































































































































































Reviews:

No comments