Pontiac 2001 Aztek Owner'S Manual Download Page 389

Page: 389 / 433

6-62

Underhood Fuse and Relay Center

This fuse and relay center is located in the engine
compartment, on top of the windshield washer
fluid reservoir.

See “Engine Compartment Overview” in the Index for
more information on location.

The fuses marked spare are available if a replacement
fuse is needed.

To remove the cover, press the two tabs in and lift up the
cover. Remove the cover.

Mini Fuses

Usage

Fuel Pump

Air Conditioning Compressor Clutch

Horn

Engine Controls

Emissions

and Sensors

Power Control
Module (PCM)

Battery Power

Anti

Lock Brakes (ABS)

Control Module

Transaxle Solenoids

Summary of Contents for 2001 Aztek

















































































































































































































































































































































































































































Search results

Summary of Contents for 2001 Aztek

Reviews:

Pontiac 2001 Aztek, Owner'S Manual, Page: 389 / 433

Search results

Summary of Contents for 2001 Aztek

Reviews: