manualshive.com logo in svg

Pontiac 2001 Aztek, Owner'S Manual, Page: 361 / 433

Share
Download
Pontiac 2001 Aztek Owner'S Manual Download Page 361

6-34

Bulb Replacement

For the type of bulbs, see “Replacement Bulbs” in 
the Index.

For any bulb changing procedure not listed in this
section, contact your dealer’s service department.

Halogen Bulbs

CAUTION:

Halogen bulbs have pressurized gas inside and
can burst if you drop or scratch the bulb. You or
others could be injured. Be sure to read and
follow the instructions on the bulb package.

Headlamps

1. Open the hood.

2. Lift up the headlamp

retaining clip partway,
but do not remove.

3. Unsnap the headlamp assembly by pulling it

forward, away from the vehicle.

4. Disconnect the electrical connector by pulling 

back on the locking tab, located on the electrical
connector, to separate the two connectors.

Summary of Contents for 2001 Aztek


















































































































































































































































































































































































































































Reviews:

No comments