Pontiac 2001 Aztek Owner'S Manual Download Page 345

Page: 345 / 433

6-18

3. Then squeeze the tab on the left of the inner access

panel to open the door.

4. The first air filter will pull straight out. To remove

the second, reach in and slide it toward the opening.
Pull the second filter out.

5. Replace the filters by reversing Step 4. Make sure

the filters are inserted so that the sealing foam is
angled in the same direction on both filters.

For the type of filter to use, see “Normal
Maintenance Replacement Parts” in the Index.

6. Close the inner access door, while squeezing the tab.

Be sure it is tightly closed.

7. Snap the outer access panel into the back of the

glove box.

Summary of Contents for 2001 Aztek

















































































































































































































































































































































































































































Search results

Summary of Contents for 2001 Aztek

Reviews:

Pontiac 2001 Aztek, Owner'S Manual, Page: 345 / 433

Search results

Summary of Contents for 2001 Aztek

Reviews: