Pontiac 2001 Aztek Owner'S Manual Download Page 312

Page: 312 / 433

5-22

Removing the Spare Tire and Tools

The equipment you’ll need
is located in the storage
compartment at the rear of
the vehicle, on the
passenger’s side.

1. Remove the optional side convenience net.

2. Open the jack storage compartment by lifting up the

tab and pulling the cover off.

A. Jack
B. Wing Nut and Screw

C. Jacking Instructions
D. Folding Wrench

Remove the jack and jacking tools by turning the wing
nut counterclockwise.

Separate the jack and remove the folding wrench from
the jack.

Summary of Contents for 2001 Aztek

















































































































































































































































































































































































































































Search results

Summary of Contents for 2001 Aztek

Reviews:

Pontiac 2001 Aztek, Owner'S Manual, Page: 312 / 433

Search results

Summary of Contents for 2001 Aztek

Reviews: