manualshive.com logo in svg

Pontiac 2001 Aztek, Owner'S Manual, Page: 307 / 433

Share
Download
Pontiac 2001 Aztek Owner'S Manual Download Page 307

5-17

How to Add Coolant to the Radiator

1. You can remove the radiator pressure cap when 

the cooling system, including the radiator pressure
cap and upper radiator hose, is no longer hot. 
Turn the pressure cap slowly counterclockwise until
it first stops. (Don’t press down while turning the
pressure cap.)

If you hear a hiss, wait for that to stop. A hiss means
there is still some pressure left.

2. Then keep turning the pressure cap, but now push

down as you turn it. Remove the pressure cap.

CAUTION:

You can be burned if you spill coolant on hot
engine parts. Coolant contains ethylene glycol
and it will burn if the engine parts are hot
enough. Don’t spill coolant on a hot engine.

Summary of Contents for 2001 Aztek


















































































































































































































































































































































































































































Reviews:

No comments