manualshive.com logo in svg

Pontiac 2001 Aztek, Owner'S Manual, Page: 303 / 433

Share
Download
Pontiac 2001 Aztek Owner'S Manual Download Page 303

5-13

When the engine is cold, the coolant level should be at
or above the FULL COLD mark. If it isn’t, you may
have a leak in the radiator hoses, heater hoses, radiator,
water pump or somewhere else in the cooling system.

CAUTION:

Heater and radiator hoses, and other engine
parts, can be very hot. Don’t touch them. 
If you do, you can be burned.

Don’t run the engine if there is a leak. If you run
the engine, it could lose all coolant. That could
cause an engine fire, and you could be burned.
Get any leak fixed before you drive the vehicle.

NOTICE:

Engine damage from running your engine
without coolant isn’t covered by your warranty.
See “Overheated Engine Protection Operating
Mode” in the Index.

Summary of Contents for 2001 Aztek


















































































































































































































































































































































































































































Reviews:

No comments