manualshive.com logo in svg

Pontiac 2001 Aztek, Owner'S Manual, Page: 27 / 433

Share
Download
Pontiac 2001 Aztek Owner'S Manual Download Page 27

1-15

2. Push the rear of the seat down to lock the rear latches

onto the rear set of floor pins.

3. Push and pull on the seat to check that it is 

properly attached.

CAUTION:

A seat that isn’t locked into place properly can
move around in a collision or sudden stop. People
in the vehicle could be injured. Be sure to lock
the seat into place properly when installing it.

CAUTION:

If the seatback isn’t locked, it could move
forward in a sudden stop or crash. That could
cause injury to the person sitting there. Always
press rearward on the seatback to be sure it 
is locked.

Summary of Contents for 2001 Aztek


















































































































































































































































































































































































































































Reviews:

No comments