Pontiac 2001 Aztek Owner'S Manual Download Page 25

Page: 25 / 433

1-13

Removing the Captain’s Chairs

1. Make sure the seatback is in the upright position.

2. Lift the seatback recliner lever to fold the

seatback forward.

3. Pull the lever, located at the base on the outboard

side of the seat, to release the rear latches from the
floor pins.

4. The seat can then be lifted off the front floor pins.

5. Remove the seat by rocking it slightly toward the

rear of the vehicle and then pulling it out.

Repeat these steps for the other captain’s chair.

Summary of Contents for 2001 Aztek

















































































































































































































































































































































































































































Search results

Summary of Contents for 2001 Aztek

Reviews:

Pontiac 2001 Aztek, Owner'S Manual, Page: 25 / 433

Search results

Summary of Contents for 2001 Aztek

Reviews: