Pontiac 2001 Aztek, Owner'S Manual, Page: 22 / 433

1-10
Replacing the Split Bench Sections
Make sure the seatback is in the folded forward position
and the safety belts are on the correct section of the seat.
Don’t put the sections of the bench seat in so they face
rearward because they won’t latch that way.
The split bench seat sections have seat position labels,
located on the back of each section, showing where the
section must go. Follow the floor pin diagram earlier.
D The left section uses the A and B sets of floor cups.
D The right section uses the C and D sets of
floor cups.
The seat must be placed in the proper location for the
legs to attach correctly.
1. Squeeze the angled latch release bar toward the
straight crossbar while placing the front hooks of the
bench seat onto the front two floor pins.