manualshive.com logo in svg

Pontiac 2001 Aztek, Owner'S Manual, Page: 210 / 433

Share
Download
Pontiac 2001 Aztek Owner'S Manual Download Page 210

3-10

Rear Window Defogger

Press the REAR button, 
the indicator light will 
glow, to warm the defogger 
grid on the rear window.
The engine must be 
running for the defogger
grid to warm up.

The system will turn off automatically after about 
10 minutes of use. If you turn it on again, the defogger
will operate for about five minutes. You can also turn
the defogger off by turning the ignition to OFF or 
by pressing the button again. The indicator light 
will turn off.

Do not attach a temporary vehicle license across the
defogger grid on the rear window.

NOTICE:

Don’t use a razor blade or something else sharp
on the inside of the rear window. If you do, you
could cut or damage the warming grid, and the
repairs wouldn’t be covered by your warranty.

Summary of Contents for 2001 Aztek


















































































































































































































































































































































































































































Reviews:

No comments