Pontiac 2001 Aztek Owner'S Manual Download Page 21

Page: 21 / 433

1-9

2. Make sure the seatback is in the upright position.

3. Lift the seatback recliner lever to fold the

seatback forward.

4. Pull the lever, located at the base on the outboard

side of the seat, to release the rear latches from the
floor pins and flip the seat forward.

The seat can stay in this position or it can be
removed from the vehicle by following the
next steps.

5. To release the front latches, squeeze the angled latch

release bar toward the straight crossbar.

6. Remove the seat by rocking it slightly toward the

rear of the vehicle and then pulling it out.

Repeat these steps for the other section of the split
bench seat.

Summary of Contents for 2001 Aztek

















































































































































































































































































































































































































































Search results

Summary of Contents for 2001 Aztek

Reviews:

Pontiac 2001 Aztek, Owner'S Manual, Page: 21 / 433

Search results

Summary of Contents for 2001 Aztek

Reviews: