manualshive.com logo in svg

Pontiac 2001 Aztek, Owner'S Manual, Page: 209 / 433

Share
Download
Pontiac 2001 Aztek Owner'S Manual Download Page 209

3-9

Defogging and Defrosting

To rapidly defrost the windshield, move the temperature
knob all the way up (to the red area) and turn the mode
knob to DEFROST. Adjust the fan to the highest speed.

To keep the windshield clear and bring in heated 
air through the heater ducts, turn the mode knob 
to DEFOG.

When the temperature outside is above freezing, the air
conditioner compressor will run in these settings to help
remove moisture from the air.

Your vehicle is equipped with side window defogger
vents located on the top of the instrument panel. For
additional side window defogging, turn the mode knob
to the BI

-

LEVEL setting and adjust the fan to the

highest speed. Aim the side vents on the instrument
panel toward the side windows. For increased airflow to
the side vents, close the center vents.

Operating the HVAC system in the RECIRCULATION
mode may cause fogging of the vehicle’s windows when
the weather is cold and damp. To clear the fog, switch
the HVAC system to either the DEFOG or DEFROST
mode and increase the fan speed. To avoid re

-

fogging of

the windows, operate the HVAC system in the
OUTSIDE AIR mode.

For additional information, refer to
“RECIRCULATION” earlier in this section.

Summary of Contents for 2001 Aztek


















































































































































































































































































































































































































































Reviews:

No comments