manualshive.com logo in svg

Pontiac 2001 Aztek, Owner'S Manual, Page: 198 / 433

Share
Download
Pontiac 2001 Aztek Owner'S Manual Download Page 198

2-114

Head

-

Up Display (Option)

CAUTION:

If the HUD image is too bright, or too high in
your field of view, it may take you more time to
see things you need to see when it’s dark outside.
Be sure to keep the HUD image dim and placed
low in your field of view.

If your vehicle has this option, it can display the
speedometer reading in English or metric. The current
radio station, CD number and/or track number or tape
may also be displayed and will appear as an image
focused out toward the front of your vehicle.

The Head

-

Up Display also displays the following

messages when they appear on the instrument 
panel cluster:
D Turn Signal Indicators
D High

-

Beam Indicator

D Low

-

Fuel Warning Message

See each of these in the Index for more information.

The Head

-

Up Display also displays a CHECK GAGES

icon, the following lights and message could appear 
on the instrument panel cluster when CHECK 
GAGES appears:
D Engine Coolant Temperature Warning Message
D Low Oil Pressure Message
D Charging System Indicator Message
D Low Brake Fluid Warning Message
See each of these in the Index for more information.

Summary of Contents for 2001 Aztek


















































































































































































































































































































































































































































Reviews:

No comments