manualshive.com logo in svg

Pontiac 2001 Aztek, Owner'S Manual, Page: 194 / 433

Share
Download
Pontiac 2001 Aztek Owner'S Manual Download Page 194

2-110

When your vehicle was shipped from the factory, it was
programmed in PARK. The mode to which the vehicle
has been programmed may have been changed since it
left the factory. To determine the mode to which your
vehicle is programmed to or to program your vehicle to
a different mode, do the following:

1. Follow the instructions for “Entering Programming

Mode” listed previously.

2. Follow the instructions for programming 

AUTO DOOR UNLOCK to DRIVER or ALL 
listed previously.

3. Press the MODE button until AUTO DOOR

UNLOCK/ PARK KEYOUT appears on the DIC.

4. Press the SET button until the arrow is before 

PARK or KEY OUT.

The mode you selected is now set. You can either exit
programming mode by following the instructions later 
in this section or program the next feature available on
your vehicle.

Delayed Locking

The delayed locking feature can be programmed to 
ON or OFF.

If programmed to ON and you try to lock your vehicle
using the power door lock switch or the optional remote
keyless transmitter while any door is opened, you will
hear three chimes and the doors will not lock. Five
seconds after the last door is closed, all doors will lock.

Once delayed locking is programmed to ON, you can do
the following:
D Cancel the delayed locking by pressing unlock using

the power door lock switch or by fully inserting the
key in the ignition,

D override the delayed locking feature by pressing lock

immediately using the power door lock switch, or

D let the delayed locking feature complete the locking

of the vehicle.

Summary of Contents for 2001 Aztek


















































































































































































































































































































































































































































Reviews:

No comments