manualshive.com logo in svg

Pontiac 2001 Aztek, Owner'S Manual, Page: 189 / 433

Share
Download
Pontiac 2001 Aztek Owner'S Manual Download Page 189

2-105

Entering Programming Mode

To program features, your vehicle must be in the
programming mode. Follow these steps:

1. Turn the ignition key to ON with the vehicle 

in PARK (P).

2. Press and release the MODE button, 

scrolling through the DIC messages, until
PERSONALIZATION PRESS SET TO 
BEGIN is displayed.

3. Press the SET button and TO SELECT DRIVER

PRESS REMOTE LOCK will appear. Press the
LOCK button on the optional remote keyless entry 
to start. This identifies which remote keyless entry
transmitter is being programmed by displaying
PERSONALIZATION FOR DRIVER 1 or
PERSONALIZATION FOR DRIVER 2.

United States

Canada

4. The program mode message will appear in the

message center as an indication that your vehicle is
ready to begin programming.

5. Follow the instructions given by the DIC.

Summary of Contents for 2001 Aztek


















































































































































































































































































































































































































































Reviews:

No comments