manualshive.com logo in svg

Pontiac 2001 Aztek, Owner'S Manual, Page: 187 / 433

Share
Download
Pontiac 2001 Aztek Owner'S Manual Download Page 187

2-103

Compass Variance

Compass variance is the difference between magnetic
north and geographic north. In some areas of the
country, the difference is great enough to cause the
compass to give false readings. If this occurs, the
compass must be set.

Automatic Compass Calibration

The compass is self

-

calibrating, which eliminates the 

need to manually set the compass. When the vehicle is 
new, the calibration process may not be complete. In these  
cases,the calibration symbol “C” will be displayed where
the compass reading is normally displayed.

To calibrate the compass, in an area free from 
large metal objects, make three 360 degree turns. 
The calibration symbol will turn off and the compass
reading will be displayed.

Manual Compass Calibration

If the compass appears erratic and the calibration
symbol does not appear, you must manually put the
compass into the calibration mode. To get into this
mode, do the following:

1. Turn the ignition on and cycle the DIC to the

compass/temperature mode.

2. Press and hold the SET button for longer then 

three seconds.

Summary of Contents for 2001 Aztek


















































































































































































































































































































































































































































Reviews:

No comments