manualshive.com logo in svg

Pontiac 2001 Aztek, Owner'S Manual, Page: 183 / 433

Share
Download
Pontiac 2001 Aztek Owner'S Manual Download Page 183

2-99

AWD Disable Warning Message

United States

Canada

You will receive this message when there is a spare tire
on the vehicle or when the anti

-

lock brake system

warning light comes on.

The all

-

wheel

-

drive system will be disabled until the

compact spare tire is replaced by a full

-

size tire. If the

warning message is still on after putting on the full

-

size

tire, you need to reset the warning message. To reset the
warning message, turn the ignition to OFF then to ON.
If the message stays on, see your dealer right away. See
“All

-

Wheel Drive” in the Index for more information.

Program Mode Message

United States

Canada

If you receive this message, your vehicle is in program
mode. You are ready to begin programming your
vehicle’s customization features.

If your vehicle does not have the Driver Information
Center (DIC), see “Vehicle Customization” in the Index.
If your vehicle is equipped with the Driver Information
Center (DIC), see “Driver Information Center” in 
the Index.

Summary of Contents for 2001 Aztek


















































































































































































































































































































































































































































Reviews:

No comments