manualshive.com logo in svg

Pontiac 2001 Aztek, Owner'S Manual, Page: 182 / 433

Share
Download
Pontiac 2001 Aztek Owner'S Manual Download Page 182

2-98

Low Washer Fluid Warning Message

United States

Canada

If your washer fluid is low, the warning message will
come on and stay on until you add washer fluid. 
See “Windshield Washer Fluid” in the Index for 
adding washer fluid instructions.

If the warning message is still on after adding fluid, 
you need to reset the warning message. To reset the
warning message, turn the ignition to OFF then to ON.
If the message stays on, see your dealer right away.

Service Vehicle Soon Message

United States

Canada

This light will come on if your vehicle has certain
non

-

emission related problems.

For example, if the entire electrical system fails to send
and receive messages from the vehicle’s components,
this message will come on.

These problems may not be obvious and may affect
vehicle performance or durability. Consult a qualified
dealership for necessary repairs to maintain top 
vehicle performance.

Summary of Contents for 2001 Aztek


















































































































































































































































































































































































































































Reviews:

No comments