manualshive.com logo in svg

Pontiac 2001 Aztek, Owner'S Manual, Page: 177 / 433

Share
Download
Pontiac 2001 Aztek Owner'S Manual Download Page 177

2-93

If the traction control system warning message comes 
on and stays on for an extended period of time when 
the system is turned on, your vehicle needs service.

Traction Active Message (Option)

United States

Canada

If your vehicle has the traction control system, the
TRACTION ACTIVE message will appear when the
traction control system is limiting wheel spin. You may
feel or hear the system working, but this is normal.

Slippery road conditions may exist if this message
appears, so adjust your driving accordingly. The message
will stay on for a few seconds after the traction control
system stops limiting wheel spin.

Engine Coolant Temperature 
Warning Message

United States

Canada

This message will come on when your engine gets too hot.

If this message comes on, it means that your engine
coolant has overheated. If you have been operating your
vehicle under normal driving conditions, you should pull
off the road, stop your vehicle and turn off the engine as
soon as possible.

See “Engine Overheating” in the Index.

Summary of Contents for 2001 Aztek


















































































































































































































































































































































































































































Reviews:

No comments