Pontiac 2001 Aztek Owner'S Manual Download Page 16

Page: 16 / 433

1-4

6-Way Power Seat (Option)

The six

way power seat

controls are located on the
outboard sides of the
driver’s or both the driver’s
and front passenger’s seat.

D Move the front of the control in the direction of the

arrows to adjust the front portion of the cushion up
or down.

D Move the rear of the control in the direction of the

arrows to adjust the rear portion of the cushion up
or down.

D Lift up or push down on both outer arrows at the

same time to move the entire seat up or down.

D To move the whole seat forward or rearward, slide

the control in the direction of the center arrows.

Manual Lumbar (If Equipped)

The knob that controls this
feature is located on the
outboard sides of the
driver’s and front
passenger’s seats.

Turn the knob toward the front of the vehicle to increase
lumbar support. Turn the knob toward the rear of the
vehicle to decrease lumbar support.

Summary of Contents for 2001 Aztek

















































































































































































































































































































































































































































Search results

Summary of Contents for 2001 Aztek

Reviews:

Pontiac 2001 Aztek, Owner'S Manual, Page: 16 / 433

Search results

Summary of Contents for 2001 Aztek

Reviews: