Pontiac 2001 Aztek, Owner'S Manual, Page: 150 / 433

2-66
Replacing the Floor Track Assembly
Before beginning this procedure make sure that nothing
is in the rear of the vehicle.
1. Slide the floor track assembly in while aligning the
front forks, located on the bottom front of the track
assembly, so that the forks slide under the two front
floor retainers.
2. Insert the slide locks into the two rear floor retainers.
You may have to apply downward pressure to the
floor track assembly to engage the slide locks under
the floor retainers.
Double check to ensure that the slide locks are
engaged under the retainers and locked into place.
3. Pull up on the floor track assembly to make sure
it is locked into place.
Replacing the Sliding Rear Convenience/Cargo Tray
The floor track assembly must be installed first for the
sliding rear convenience/cargo tray to stay locked into
place. See “Replacing the Floor Track Assembly”
previously for more information.
1. Pick up the tray by the handle and support the tray
from the bottom with your other hand.
There are four (4) axles on the bottom of the tray
(two in front and two in back).
2. Place the tray onto the floor track assembly. Make
sure that the two front axles are placed over the
hooks on the rear of the floor track assembly.
Make sure the rollers on the bottom of the tray are
located in the tracks of the floor track assembly.
3. Roll the tray forward into the vehicle until you
hear a click.