manualshive.com logo in svg

Pontiac 2001 Aztek, Owner'S Manual, Page: 139 / 433

Share
Download
Pontiac 2001 Aztek Owner'S Manual Download Page 139

2-55

Battery Saver

Your vehicle has a feature to help prevent you from
draining the battery, in case you accidentally leave the
interior or exterior lamps on. If you leave any interior or
exterior lamps on while the ignition is in OFF, they will
automatically turn off after 10 minutes.

If your vehicle has less than 14 miles (24 km) on the
odometer, the battery saver will turn off the lamps after
only three minutes.

Mirrors

Inside Day/Night Rearview Mirror

To reduce glare from lights behind you, pull the lever
toward you (to the night position). To return the mirror
to the day position, push the lever away from you.

Power Outside Rearview Mirrors

The power mirror control
switch is located on the
driver’s door.

Turn the knob counterclockwise to adjust the driver’s
side mirror. Turn the knob clockwise to adjust the
passenger’s side mirror. After selecting which mirror to
adjust, move the knob in the direction you want the
mirror to go.

If you are not adjusting either mirror, leave the control
in the center off position. This prevents moving the
mirrors accidentally once you have adjusted them.

Adjust each mirror so you can see the side of your
vehicle and the area behind your vehicle.

Summary of Contents for 2001 Aztek


















































































































































































































































































































































































































































Reviews:

No comments