manualshive.com logo in svg

Pontiac 2001 Aztek, Owner'S Manual, Page: 135 / 433

Share
Download
Pontiac 2001 Aztek Owner'S Manual Download Page 135

2-51

Your fog lamps will go off when you switch to high
beams. When you return to low beam, the fog lamps
will come back on. Using your high beams in fog is 
not recommended.

Interior Lamps

Your interior lamp control 
is located below the 
exterior lamp control.

Instrument Panel Intensity Control

To increase or decrease the brightness of the instrument
panel lights, press the knob located on the interior lamp
control. The knob will extend. Turn this knob clockwise
to increase brightness or counterclockwise to decrease
brightness. Press this knob in when not in use.

Interior Lamps Control

Turn the interior lamp control to one of the 
following positions:
D OFF: to turn the interior lamps off.
D DOOR: to turn on the interior lamps when any 

door is opened and when the ignition key is removed
from the ignition.

D ON: to turn the interior lamps on.

Summary of Contents for 2001 Aztek


















































































































































































































































































































































































































































Reviews:

No comments