manualshive.com logo in svg

Pontiac 2001 Aztek, Owner'S Manual, Page: 133 / 433

Share
Download
Pontiac 2001 Aztek Owner'S Manual Download Page 133

2-49

Exterior Lamps

The exterior lamp control 
is located to the left of 
the steering column.

 Turning the knob to this setting turns on the following:

D Parking Lamps
D Sidemarker Lamps
D Taillamps
D Instrument Panel Lights

 Turning the knob to this setting turns on the headlamps,

together with the following:
D Parking Lamps
D Sidemarker Lamps

D Taillamps
D Instrument Panel Lights
AUTO: Turning the knob to this setting will activate 
the automatic headlamp control when it is dark enough
outside and turn off all the lamps and lights during 
the day.

Automatic Headlamp Control

When the exterior lamp control is turned to AUTO, 
the headlamps and parking lamps will come on
automatically when it is dark enough outside.

The lamps will come on automatically if the following
conditions are met:
D It is dark enough outside,
D the ignition is in ON,
D the parking brake is released, and
D the exterior lamp control is in the AUTO position.

Lamps on Reminder

If the driver’s door is opened and you turn the ignition
to OFF while leaving the lamps on, you will hear a
warning chime.

Summary of Contents for 2001 Aztek


















































































































































































































































































































































































































































Reviews:

No comments