manualshive.com logo in svg

Pontiac 2001 Aztek, Owner'S Manual, Page: 131 / 433

Share
Download
Pontiac 2001 Aztek Owner'S Manual Download Page 131

2-47

If your vehicle is in cruise control when the traction
control system begins to limit wheel spin, the cruise
control will automatically disengage. See “Traction
Control System” in the Index. When road conditions
allow you to safely use it again, you may turn the cruise
control back on.

Setting Cruise Control

CAUTION:

If you leave your cruise control switch on when
you’re not using cruise, you might hit a button
and go into cruise when you don’t want to. You
could be startled and even lose control. Keep the
cruise control switch off until you want to use
cruise control.

1. Move the cruise control switch to ON.

2. Get up to the speed you want.

3. Push in the SET button at the end of the lever 

and release it.

4. Take your foot off the accelerator pedal.

Resuming a Set Speed

Suppose you set your cruise control at a desired 
speed and then you apply the brake. This, of course,
shuts off the cruise control. But you don’t need to reset
it. Once you’re going about 25 mph (40 km/h) or more,
you can move the cruise control switch from ON to
RESUME/ACCEL (R/A) briefly.

You’ll go right back up to your chosen speed and 
stay there.

If you hold the switch at R/A, the vehicle will keep
going faster until you release the switch or apply the
brake. So unless you want to go faster, don’t hold the
switch at R/A.

Summary of Contents for 2001 Aztek


















































































































































































































































































































































































































































Reviews:

No comments