Pontiac 2001 Aztek Owner'S Manual Download Page 121

Page: 121 / 433

2-37

4. Push the shift lock release lever in with the access

panel cover.

5. Move the shift lever out of PARK (P).

6. Put the access panel cover back on by aligning the

access panel grooves with the cupholder storage
compartment and push down.

7. Replace the cupholder liner.

Parking Brake

To set the parking brake,
hold the regular brake pedal
down with your right foot
and push down on the
parking brake pedal with
your left foot.

If the ignition is on, the brake system warning light
will come on. See “Brake System Warning Light”
in the Index.

Summary of Contents for 2001 Aztek

















































































































































































































































































































































































































































Search results

Summary of Contents for 2001 Aztek

Reviews:

Pontiac 2001 Aztek, Owner'S Manual, Page: 121 / 433

Search results

Summary of Contents for 2001 Aztek

Reviews: