manualshive.com logo in svg

Pontiac 2001 Aztek, Owner'S Manual, Page: 104 / 433

Share
Download
Pontiac 2001 Aztek Owner'S Manual Download Page 104

2-20

Programmable Modes

Mode 1: Both Features Off (Remote lock and unlock
confirmation are disabled.)

Mode 2: Exterior Lamps Flash Only
D When you use the remote keyless entry transmitter 

to lock your vehicle, your headlamps and parking
lamps will flash briefly to let you know the
command has been received.

D When you use the remote keyless entry transmitter 

to unlock your vehicle, your headlamps and parking
lamps will flash briefly during the day or the
perimeter lighting will flash briefly at night to let
you know the command has been received.

Mode 3: Exterior Lamps Flash and Horn Sound
D When you use the remote keyless entry transmitter 

to lock your vehicle, your headlamps and parking
lamps will flash briefly on each press and your horn
will sound briefly on the second or any other press to
let you know the command has been received.

D When you use the remote keyless entry transmitter 

to unlock your vehicle, your headlamps and parking
lamps will flash briefly during the day or the
perimeter lighting will flash briefly at night to let
you know the command has been received.

When your vehicle was shipped from the factory, it was
programmed in Mode 3. The mode to which the vehicle
has been programmed may have been changed since it
left the factory. To determine the mode to which your
vehicle is programmed to or to program your vehicle to
a different mode, do the following:

1. Follow the instructions for “Entering Programming

Mode” listed previously.

2. Press the LOCK button on the remote keyless 

entry transmitter.

3. Count the number of chimes you hear. The number 

of chimes indicates the vehicle’s current programmed
mode. If you do not wish to change the current 
mode, you can either exit the programming mode 
by following the instructions later in this section or
program the next feature available on your vehicle.

4. Press LOCK on the remote keyless entry transmitter

to change the current mode.

5. Press LOCK on the remote keyless entry transmitter

until you hear the number of chimes corresponding
to the mode selection you want.

The mode you selected is now set. You can either exit
the programming mode by following the instructions
later in this section or program the next feature available
on your vehicle.

Summary of Contents for 2001 Aztek


















































































































































































































































































































































































































































Reviews:

No comments