yellow
blue
6-9
Then go to the front of the vehicle and lift up on the
secondary hood release lever. The secondary hood
release lever is located near the front center of the hood
toward the driver’s side.
To make suer that the secondary hood release handle
works properly, lubricate the hood latch at least once
a year.
Lift the hood, release the
hood prop from its retainer
and put the hood prop into
the slot in the hood
marked “prop rod.”
Use the prop rod sleeve
when handling the prop rod.
Before closing the hood, be sure all the filler caps are on
properly. Then lift the hood to relieve pressure on the
hood prop. Remove the hood prop from the slot in the
hood and return the prop to its retainer. Lower the hood
8 to 10 inches (20 to 25 cm) above the vehicle and
release to latch fully. Check to make sure the hood is
closed and repeat if necessary.
Summary of Contents for 1999 Sunfire
