Ponovo PM605A, Instruction Manual, Page: 6 / 39

PM605A Hardware Instruction Manual
6
1.3. Panel Description
1.3.1 Front panel
Figure 1-1 Front panel

1——AC current signal output terminal: CH1, CH2, CH3

2——AC voltage signal output terminal: CH1, CH2, CH3, CH4

3——DC current/voltage signal output terminal: Idc, Udc

4——DC current/voltage signal measurement input terminal: Idc, Udc

5——LCD screen ( using while offline)

6——Function button (using while offline)

7——USB or Ethernet data interface

8——Rotary encoder ( setting parameters while offline)

9——Signal indicator:

POWER: POWER indicator lights when the power is supplied.

RUN: RUN indicator flickers or off when the kit is working.

ALARM: ALARM indicator flickers and gives off beep alarm signal when the device is
over hot or overload during output status, or when DC voltage input is wrong
connected to AC voltage channel. The kit will stop output after over hot alarm.