background image

PLEASE CALL 1-888-755-6750 BEFORE RETURNING TO THE STORE. 

                      WWW.THEPONDBOSS.NET

 

 

 

 

Submersible Waterfall Pump 

1250 Gallons Per Hour 

 

                                                 

ITEM #PW1250

 

 

 

PACKAGE CONTENTS 

 

 
 
 
 
 
 

 
 
 
 
 
 

  WARNINGS AND CAUTIONS 

WARNING 

 

Risk of electrical shock. This pump is supplied with a grounding conductor and grounding–type 
attachment plug. To reduce the risk of electric shock, be certain that it is connected only to a properly 
grounded, grounding-type receptacle. 

 

Do not exceed the voltage shown on the pump. 

 

Always disconnect pump  from the power source before beginning any maintenance or work on the 
pump. 

 

Inspect cord for damage before installation and/or maintenance. Replace the entire pump assembly if 
damage is found. 

 

Do not remove the grounding pin from the power cord plug. 

 

Risk of electrical shock: This pump has not been investigated for use in swimming pools or marine 
areas.  

CAUTION 

 

This pump has been evaluated for use with water only. 

 

Use a proper power source as indicated on the pump label.   

 

Keep the cord away from high temperatures or other heat sources. 

 

 Do not pump heated liquids. 

 

Do not let the pump run dry.  Pump must be completely submerged for proper operation and cooling. 

 

Operate in fresh water only.  Avoid heavily chlorinated water and water with high pH levels. 

 

Do not lift the pump by its power cord. 

 

 

 

 

 

Part 

Description 

Quantity 

Pump 

1 in. and 1-1/2 in. ID tubing 

adapter 

pump barrier bag 

REMINDER 

CALL 1-888-755-6750 

BEFORE RETURNING TO STORE. 

Questions, problems, missing parts? 

Before returning 

to your retailer, call our customer service department at  
1-888-755-6750, 8 a.m.-6 p.m., EST, Monday-Friday, or 
email us at [email protected].  Or visit our 
website www.thepondboss.net. 

 

 

 

Summary of Contents for PW1250






Reviews: