9/17/2012
ASSEMBLY INSTRUCTIONS
2.
DESCRIPTION
Models: TGD100, TGD101, TGD102
9/8/2011
Features
No assembly required
1.
Extra screw plugs included
QTY
TGD100
1
HDWPK-#8 SCREW PLUGS, 4X (EXTRAS)
TGD101
TGD102
Page 1: ...9 17 2012 ASSEMBLY INSTRUCTIONS 2 DESCRIPTION Models TGD100 TGD101 TGD102 9 8 2011 Features No assembly required 1 Extra screw plugs included QTY TGD100 1 HDWPK 8 SCREW PLUGS 4X EXTRAS TGD101 TGD102 ...
Page 2: ... arm supports TGD200 TGD201 TGD202 Qty Attach back of arm by threading into the pilot hole until the arm is snug Model 4mm Hex Key included __ 2 ARM ASMB LH RH __ 1 CHAIR __ 1 HARDWARE PACK against the back leg Step 1 Step 2 Attach A bolts thru the seat TOOLS NEEDED ALL HARDWARE IS COATED STAINLESS STEEL TGD201 TGD202 HDWPK 8 SCREW PLUGS 4X EXTRAS 1 A 1 4 20 X 1 3 4 WAFER SHCS 4 ...
Page 3: ... __ 4 Foot __ 4 Brace ALL HARDWARE IS COATED STAINLESS STEEL Step 1 Attach feet to legs using 8 2 Chair bolts Step 2 Lay the table frame on a flat surface Attach the leg assemblies to the frame using 16 27x2 screws Do not tighten yet Step 4 Set table upright and tighten all bolts Step 3 Attach braces to the leg assemblies using 8 27x3 screws TOOLS NEEDED 4mm T Handle HEX KEY INCLUDED 8 8 B 27 X 3 ...
