PolyVision
38
Care and maintenance
For all TS and TSL whiteboards:
•
Use only the dry-erase markers and erasers recommended by
PolyVision. To order markers, call 1.800.620.POLY (7659) in the USA,
1.678.542.3100 outside the USA, or +32 (0)89 32 31 30 in Europe, or
go to:
www.polyvision.com
•
Change erasers when they become dirty to leave less ink residue on
your board. Replacement erasers are available directly from PolyVision.
Call 1.800.620.POLY (7659) in the USA, 1.678.542.3100 outside the
USA, or +32 (0)89 32 31 30 in Europe, or go to:
www.polyvision.com
•
Do not use ballpoint pens or other pointed instruments on the surface.
•
Do not use abrasive cleaners on the surface.
•
To erase pen strokes made with permanent markers, write over the
marks with a dry-erase marker of the same or similar color, then erase.
•
To avoid damage, use only the power supply or cord that came with
your whiteboard.
•
To store your whiteboard for prolonged periods, place it in a vertical
position. Do not store flat.
•
Keep all shipping cartons in case you need to return your board for
repair.
Caring for dry-erase markers and erasers
•
Cover the markers when not in use.
•
Store the markers horizontally.
•
Rub the eraser against a towel to remove ink residues. If excessive ink
buildup occurs, contact PolyVision for a replacement. Call
1.800.620.7659 (POLY) in the USA, 1.678.542.3100 outside the USA,
or +32 (0)89 32 31 30 in Europe, or go to:
www.polyvision.com
