PolyVision
37
Care and maintenance
Care and maintenance
TS maintenance
Caring for the TS or TSL whiteboard
Your whiteboard can have one of two possible surfaces. The appropriate
care of each surface is very different. To determine which whiteboard
surface you have, find the serial number located on the underside of the
whiteboard tray next to the power connection.
Use the care instructions below if your board’s serial number begins with
“A” or “B”:
•
Wipe the whiteboard with a clean, soft, dry cloth or a duster.
•
Clean whiteboard parts with a cloth dampened with mild soap and
water. Stubborn stains can be removed using isopropyl alcohol.
•
Do not use spray cleaners (such as whiteboard cleaner). Spray cleaners
will damage the board.
•
Do not use abrasive cleaners or cloths.
Use the care instructions below if your board’s serial number begins with
any other letter:
•
For daily cleaning or as needed, rinse surfaces with water using a soft
cloth or sponge. Dry with a soft cloth prior to writing.
•
Remove any remaining marks with Sanford Expo Towelettes or
equivalent. Whiteboard cleaners available from PolyVision or at office
supply stores can also be used.
•
Important!
Always rinse with water and dry with a soft cloth to prevent
future markers from smearing.
•
For stubborn stains, you can use a paint/stain remover such as Goof
Off
®
. After the stain has been removed, rinse with clean water and dry
with a soft cloth.
