PolyVision
12
Getting started in projection mode
Getting started in projection mode
While using your whiteboard in projection mode, with a projector
connected to your computer, powerful options become available.
In projection mode, the whiteboard becomes a touch-sensitive monitor for
your computer. You can:
•
control your computer from the touch-sensitive whiteboard
•
run slide presentations and other software
•
annotate the projected computer with writing or drawing
•
print and save everything
To set up the projector and get started projecting your computer:
1. Locate your projector’s video cable and connect it to the video port
of your computer.
2. Connect the other end of the video cable to your projector.
3. Connect the projector’s power cord to an outlet.
4. Turn on the projector and focus your computer screen squarely onto
your whiteboard. The projected image does not need to fill the white
area.
To align the projected image with a Lightning (TSL) whiteboard:
1. Assure that at least half of the projected image is actually projected
onto the board.
2. Tap the Projection icon on the whiteboard one time.
To align the projected image with TS models:
1. Move the projector physically so that the entire solid-colored
background is positioned inside the borders of the whiteboard.
2. Tap the Projection icon on the whiteboard.