1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.
2. Assemble the tree stand and place on a level surface. (See Fig. A)
Congratulations on purchasing your new tree from
Polytree!
This tree comes with Quick Set and
Simple Shape technology-Set up and light up your tree in less than 10 minutes! Carefully follow the
instructions below on how to quickly and easily set up your new tree.
TREE ASSEMBLY INSTRUCTIONS
3. Each tree section is numbered with a tag. Please identify all sections before assembling.
4. Assemble the tree from bottom to tree top. Start with the bottom section and remove the protective
cap before inserting into the assembled stand. Make sure the pole is firmly inserted and secured into
the stand.
5. Plug the adaptor into the wall outlet (see Fig. B), continue by inserting the upper tree section(s) to the
lower section(s) until inserting the tree top. Allow branches to fall into place or gently pull up and out.
When adjusting branches, be sure that all wires are free of branch hinges.
6. Your entire tree should now be lit. If some bulbs do not light or flickers, search for any loose plugs
and/or broken, loose or missing bulbs. Connecting the plugs or replace the bad bulbs promptly in order
to maintain the performance and life expectancy of your pre-lit tree.
7. This is a Simple Shape™ tree. Just slightly upsweep all branch tips for a uniform look. Shift branches
to fill any gaps. Your Christmas tree is now complete and ready to be decorated.
ASSEMBL
Y INSTR
UCTIONS
MADE IN CHINA
MODEL #: TG90P3914C02
Fig. B - Tree and Light Assembly
*Electrical Rating For The Tree
(For Indoor Use Only)
4.8A 120V,60Hz
Section 4
Section 3
Section 2
Section 1
Do Not Tamper
Internal Parts
Open the
protective
cover
Do Not Tamper
Internal Parts
Open the
protective
cover
Do Not Tamper
Internal Parts
Open the
protective
cover
Fig. A - Tree Stand Assembly
Click
Pull apart the legs of the stand so that they
are snapped into an x-shape, place the tree
stand on a level surface.
To close the stand, press the metal button
and fold the legs together.
Foot Pedal
on/off Switch
Insert
Green Label
Plug Into Wall
Outlet
