background image

TREE ASSEMBLY INSTRUCTIONS

ASSEMBLY INSTRUCTIONS

MADE IN CHINA

SHAPING AND ADDING BRANCHES

MODEL #: SCP100785B

Fig. 3

Fig. 8

Fig. 4

Branch

Fig. 5

Side view

Fig. 2

Fig. 1

Fig. 9

Fig. 7

Fig. 6

Fig.B

C

D

B

A

F

G

G

I

H

J

TREE TOP

ROW

WITHOUT COLOR

COLOR CODED

BLACK

RED

YELLOW

GREY

BLUE

PURPLE

PURPLE

GREEN

ORANGE

BLACK

Insert and slide the legs 
upward into the slots of the 
base until firmly secured.

Congratulations on purchasing your new tree from Polytree®. Carefully follow the instructions below on
how to quickly and easily set up your new tree.
1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.
2. Assemble the tree stand and place on a level surface.

(See Fig. A)

 Then insert the tree pole tightly into the stand.

3. Sort all branches according to color codes marked on the end of each branch. Below is a list of the color codes for
your tree. 

(See Fig. B)

 (Please note: the number of rows may vary with different tree sizes.)

1. Shape each branch by either placing the branch in a bracket which is at a comfortable level to work 

(Fig. 1)

, or

    holding the branch in your hand with the hooked end pointing down. 

(Fig.2)

 BEGIN WITH THE BRANCHES AT THE

    BOTTOM OF THE TREE AND WORK UP TOWARDS THE TOP.
2. When shaping each branch, work from the branch hook and move outwards to the end tip of the branch. Start by
    wrapping the back tip around the end of the branch stem to cover the branch wire. 

(Fig. 3)

3. Working from the branch's hook moving outwards, fan each tip out using this pattern: one tip to the right of the
    branch's center wire, one tip to the left of the branch's center wire, one tip parallel to the branch's center wire.

    (Fig. 4)

 Tips should be slightly offset from each other so that they do not line up exactly one behind the other. All

    tips should be curved upwards when looked at from the side. 

(Fig. 5)

4. As each branch is shaped, place the color coded branch securely into the matching color coded bracket. 

(Fig. 6)

    As you finish each level of branches, make sure the rows look evenly distributed to the levels above and below it.
    Adjust tips as needed to even appearance. (If your tree includes branches with side wings, arrange these
    branches so that the wings are on every other branch if necessary.)
5. When all the branches are shaped and put into their color coded matching brackets, shape the top section. Do
    this by pulling down each row of tips in an even, circular pattern. 

(Fig. 7)

6. Start from the bottom layer of the tree topper and work upwards to the top tip.

Reviews: