Polytec TMS-350 TopMap In.Line, Hardware Manual

Page: 16 / 59

3-2
3 First Steps
Inspection Pay attention to the following steps when unpacking:
1. Check the packaging for signs of unsuitable handling during transport.
2. After unpacking, check all components for external damage (scratches,
loose screws, damaged components, etc.).
3. In the case of a wrong delivery, damage or missing parts, immediately
inform your local Polytec representative, stating the serial numbers of the
instruments. The serial number can be found on the name plate. You will
find the name plate on the instruments as well as on the inside cover of
this manual.
4. Carefully retain the original packaging in case you have to return the
instruments.