1
section
4
section
2
section
3
section
Part
1
2
5
Description
Section 1
Section 2
Eye bolt (preassembled with wreath)
Quantity
1
1
3
Section 3
1
4
Section 4
1
8
Congratulations on purchasing your new wreath from
Polygroup®!
Carefully follow the instructions below on how to quickly and easily set up your new wreath.
MODEL #: GD6000CYKD00
WREATH ASSEMBLY INSTRUCTIONS
*Electrical Rating For The Wreath
(For Indoor and Outdoor Use)
Input: 120V, 60Hz, 0.25A
Output: 29V DC 0.45A
PACKAGE CONTENTS
1
1
End-connector
Plug
100 Lights
100 Lights
100 Lights
100 Lights
Screw the eye bolts attached
through the hole and tighten.
2
End-connector
Plug
Insert Green
Label Extension
Cord into Adapter
Adapter
To Be Plugged
Into Wall
Outlet
Eye bolt (preassembled
with wreath)
NEED HELP?
DO NOT RETURN TO STORE. PLEASE VISIT US AT:
www.polygroupstore.com
OR
1-888-919-0070
1. Fasten the eye bolts of section 1 to section 2. Fasten
the eye bolts of section 3 to section 2. Fasten the eye
bolts of section 4 to section 3. Fasten the eye bolts of
section 4 to the end-connector of sector 1.
2. Shape and shift branches and tips to fill any gaps
inside wreath.
3. Attach the green label extension cord ensuring both
halves of the wreath get lit.
4. Insert adapter into wall outlet to light up the wreath.
STORAGE INSTRUCTIONS:
1. Remove all ornaments and decorations.
2. Disconnect from power source.
3. Detach all light plugs. Then disassemble wreath sections
from each other by loosening the eye bolts.
4. Store your wreath in a cool, dry place away from sunlight.
Exposure to excessive heat or humidity may damage the
wreath.
Control box
1
section
2
section
1
section
2
section
3
section
Screw the eye bolts
attached through the
hole and tighte.
Screw the eye bolts
attached through the
hole and tighten.
