14HP wide, 24mm deep. Poly 2 is still intended to be as simple to use as possible. Now
equipped with an OLED screen, paired with a clickable encoder, Poly 2 allows you to change
its settings easily and configure it exactly as you want. It also offers you a way to save and
recall your setting for different usage scenarios.
The new version is an excellent entry-level module and at the same time a real Swiss army
knife. It was made to change the way you interact with your sequencers, controllers, DAWs,
and other MIDI gear. This powerful module features both MIDI input and output, USB type-A
host, and USB type-B inputs combined with a vast number of configurable CV outputs. By
using the Smart Thru option, you can daisy-chain multiple Poly 2 modules together for even
more voices and outputs.
https://www.youtube.com/embed/6AZPBTDOkfM?feature=oembed
Inputs & outputs
Poly 2 offers 20 configurable outputs of which 8 are factory calibrated – Pitch 1-4 and CV 5-
8. Their accuracy in the majority of range (excluding the extreme high and low values) is
ranging from 2.5mV to 5mV. The used DAC (digital to analogue converter) is a 12bit type.
That’s why the pitch-bend is mapped from 14bit to 12bit. The remaining outputs are not
calibrated, but still, their accuracy is around 20mV.
In terms of outputs, Poly 2 is offering some smart features as well. Its all three inputs can be
used simultaneously at the same time. In a case where three identical MIDI messages are
sent from three independent sources (MIDI Input/Host/USB), the first one to reach the Poly
has the priority.
Inputs:
MIDI minijack port (attached in the kit 3,5mm jack to DIN adapter is a TRS type-B),
USB type-A Host port (+5V),
USB type-B port,
Outputs:
1-4 Gate (0-5V or 0-10V),
1-4 Pitch (0-10V, V/Oct, Hz/V, Buchla standard),
CV 1-12V (depending on the setting),
MIDI minijack port,
