background image

Original USB A power adapter (with different standard plugs set).
Branded USB-C cable (2 m).
1x Stereo 3.5 mm jack to 2x 6.3 mm jack adapter.
1x MIDI 3.5 mm jack to DIN adapter.
16GB Micro SD Card.
Micro SD to USB-A dongle adapter.
Warranty and Quick Guide information brochure.

Device Dimensions

The Polyend Play size and Weight are:

Height 8 inches (20.7 cm).
Width 11 inch (28.2 cm).
Depth 1.8 inch (4.5 cm) .
Weight: 2.9 lbs / 1.3 kg (with accessories) 2.2 lbs / 1 kg (without accessories).

Polyend Play Battery Powering

Polyend Play runs on 5V/1A and can be powered up from a power bank. The best method to
power up your instrument is to use the original AC adapter or any other stable wall charger.
Notice that an ‘intelligent’ power bank with advanced power management systems or even a
‘smart’ computer USB port used for powering your unit can possibly cause issues that may
cause your Play unit to become unstable.

Credits

Polyend Play was brought to you by the Polyend Team 2022 members ✋

With highest regards to everyone else involved. Thank you for your inestimable help!

Summary of Contents for Play




















































Reviews: