background image

Set Values for Polyend Tracker – integration mode for Polyend’s Tracker audio
workstation instrument.

Clock In > Internal, MIDI In Jack, MIDI In USB. When an external clock is enabled, the
displayed tempo value reflects the tempo provided by the MIDI source.
Transport In > Off, MIDI In Jack, MIDI In USB.
Clock Out > Off, MIDI In Jack, MIDI In USB.
Transport Out > Off, MIDI In Jack, MIDI In USB.
Notes In > Off, MIDI In Jack, MIDI In USB.

The MIDI Channel for both MIDI TRS and USB outputs is a selectable per-step in the MIDI
sequencing mode with the use of a Sample/Folder knob.

Settings

With the following available options:

View Layout – sets the layout of the View controller > Piano Notes, Grid Notes.
Grid Brightness – sets the brightness of the pads > High, Medium, Low.
Double Tap – toggles the knob touch function selection > Off, On.
Variation Page – allows you to set if the use of a single Variation slot will display
available Variation slots for Separate tracks only, or for All Tracks simultaneously.
Quantize Recording – toggles the Live Rec micromoves notation function > Off, On.
Overdub Recording – toggles the Live Rec notation overdub function > Off, On.
Firmware – displays the current firmware version and build numbers. Allows flashing
the firmware files > Update firmware.

Firmware

Firmware Updates

Summary of Contents for Play




















































Reviews: