to turn it off. An enabled effect pad is brighter than the others. You can enable only one
effect in a category, but simultaneous effects from multiple categories are possible.
You can see the description of the particular effects and the per-pad preset name displayed
on the screen while using them.
Red – activates Tune with pred/- values.
Orange – controls Low-Pass/High-Pass Filter Cutoff.
Yellow – enables Overdrive/Bit Depth effects, controlled with predefined values.
Green – triggers the Rearrange Algorithmic custom playhead shuffler presets.
Blue – triggers Repeat algorithmic step repeater presets.
Violet – applying Delay punch-in presets.
Purple – applying Reverb punch-in presets.
Pink – gives access to Loop audio buffer-type punch-in effect presets (it’s a master
effect, and does not require selecting tracks to be audible).
Important:
Perform mode is available only for audio tracks.
Entering the Perform mode disables the Live Rec mode and vice versa.
Toggling between Perform and Patterns mode is not disabling the Perform effects.
The Chance/Action, Repeat Type/Repeat Grid, and Move/Micromove knob functions are
not available in the Perform mode.
In the Perform mode, it’s not possible to edit steps. The grid does not respond to input.
Changes are applied “on top” of the step values.
Turn sound parameter knobs to apply immediate changes to the sound on tracks as
they are played. It’s not possible to save these changes.
When the parameter values of selected steps are different, a
tilde ~
sign together with a
number and
+
/
–
is displayed while changing the values of those parameters.
https://www.youtube.com/embed/l1Monds1lhY?feature=oembed
MIDI Sequencer
