VSX S
ERIES
G
ETTING
S
TARTED
G
UIDE
2
www.polycom.com/videodocumentation
System Basics
Using the Remote Control
The remote control lets you perform meeting tasks, such as placing a call and
zooming the camera. You can use the remote control to navigate screens and select
options.
You can also use the remote control to type text by pressing the number buttons
using the text-entry method commonly used with cell phones. For example, to
enter a “b”, press the number 2 button twice.
Initiates or ends a call
Adjusts the camera; also lets you
navigate through menus and dialog
boxes
Returns you to the Home screen
Opens the Directory so you can
make a call or work with an entry
Confirms your current selection; also
performs functions on highlighted items
Toggles between controlling the near-end
and far-end cameras
Returns you to the previous screen
Stores camera position (followed by a
number); moves camera to stored position
(followed by a number); deletes a stored
position (followed by Delete)
Shows, moves, or hides the
Picture-in-Picture (PIP)
Zooms the camera image in or out
Lets you select a video source
Displays the onscreen keyboard
so you can enter text
Deletes letters or numbers
Enters a dot in an IP address
Lets you enter numbers or text; stores
camera positions when pressed for
two seconds; moves the camera to a
stored position
Mutes the sound you’re sending to
the other site(s)
Increases or decreases the sound
you hear from the other site(s)
Clears snapshots sent by
far-site systems
